Bentonville Concrete editorial team · October 12, 2026 · Planning information, not a specification
What the calculation includes
Length times width gives surface area. Multiplying by thickness converted from inches to feet gives cubic feet; dividing by 27 gives cubic yards. An optional allowance shows how a chosen percentage changes that simple volume.
What it does not include
Thickened edges, footings, steps, slopes, voids and irregular shapes are not included. The tool does not tell you the thickness, reinforcement, mix or foundation design your project needs. Have the installer measure and the appropriate designer specify the actual work.
Use the result to ask better questions
Bring the dimensions and intended use to the provider rather than ordering concrete from the result. Ask which parts of the proposal explain differences from the rectangular estimate. Final quantities depend on the approved design and measured site.
How the volume is calculated
Area
Length × width, in square feet
Volume
Area × (thickness ÷ 12) ÷ 27, in cubic yards
Allowance
Base volume × (1 + chosen percentage ÷ 100)
Put the guide to work
Review new driveway planning, patio decisions or residential slab scope. Then check the Bentonville local guide and prepare your address and intended use for the provider conversation.
Call for Quote(844) 578-3017